Skip to content

Brezular's Blog

Networking & Virtualization & Linux

  • News
  • Security
  • Forensics
  • VOIP
  • RPi
  • Scripts
  • AI
    • Alpaca
    • Stable Diffusion
  • Cisco
    • ASAv
    • Cisco CCNP
    • CSR1000v
    • IOS
    • IOS-XR
  • Download
    • Appliances
    • Binaries
    • Scripts
  • GNS3
    • Dynamips
    • GNS3 labs
    • IOU
    • IOUlive
  • OS
    • Clonezilla
    • Debian
    • Fedora
    • L3 Linux switch
    • Linux Core
    • ntopng
    • Syslog-ng
  • Networking
    • Alcatel-Lucent
    • Arista
    • Check Point
    • ClearOS
    • EXOS
    • HP
    • Huawei
    • IPFire
    • Juniper
    • Mikrotik
    • Noction Flow Analyzer
    • OpenSwitch
    • Openvswitch
    • Pfsense
    • Titanium
    • vIOS
    • VyOS
  • Scripting
    • Scapy
  • Virtualization
    • Qemu
    • VirtualBox
    • VMware

Tag: recompiling kernel

  • Home
  • recompiling kernel
  • Linux Core

Part1 - Recompiling Linux Core 4.7.7 for Equal-cost Routes

  • Radovan Brezula
  • November 13, 2011

The article describes steps to recompile Core Linux 4.7.7 with the kernel 3.0.21 in order […]

  • Linux Core

Building the Linux Microcore Kernel for 802.1Q Support

  • Radovan Brezula
  • June 6, 2011

UPDATE This tutorial is valid for Microcore Linux up to version 3.8.x, kernel 2.6.33.3. The […]

Pages

  • Home
BGP
Intelligent Routing Platform

BGP management
Automated BGP Network Management

What is NetFlow?

NetFlow
NetFlow vs. sFlow vs. IPFIX vs. NetStream. Network Traffic Analysis and Monitoring.

BGP Security: BGPsec Protocol

BGP protocol
BGPsec is an integral part of the BGP protocol, and thus, BGP routers must do the…

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 221 other subscribers

Categories

Top Posts & Pages

  • Debian 13 Trixie After Install Guide
  • Enterprise Network on GNS3 - Part 1 - Introduction
  • Booting Raspberry Pi 3 B from USB Drive
  • BGP on Cisco IOS XRv - Prefix-Sets and Route-Policies
  • Juniper vMX on GNS3
  • Initial Setup of MikroTik hAP ax³ Router
  • Running Mikrotik RouterOS x86 on GNS3
  • Wake on LAN: Linux, Windows and Routers
  • Debian 13 Trixie on Raspberry Pi 3B
  • How to connect Cisco NX-OS emulator - Titanium 5.1.2 - installed on VMware to GNS3
Copyright © 2026 Brezular's Blog