Solution to VOIP Injects for Locked Shields 2014

In 2014, for the first time in Locked Shields history, VOIP topic was brought to the exercise. The task of Blue teams was to defend misconfigured VOIP systems that had been built by Green team and to solve two VOIP injects opened during the LS execution. The article that focus on describing VOIP scenario and problems connected with deployed VOIP […]
Continue reading…

Share
 

VOIP Scenario for Locked Shields 2014

In a couple months ago I was asked to bring VOIP topic to the Locked Shields 2014. It was a great challenge for me as July 2011 was the last month I touched Cisco VOIP configuration. Nevertheless I decided to accept this offer and brush up my VOIP knowledges. Previously known as the Cisco Unified […]
Continue reading…

Share
 

VOIP HOME LAB - 1.11 Filtering Traffic on Headquarters Router with Access Lists

In a previous tutorial we have configured SIP trunk and route patterns which allow users to make phone calls between Branch office and Headquarters. Connection between these two sites is not filtered and depends only on correct routing configuration on network devices. For instance traffic from data subnet VLAN 11 that is generated by users in […]
Continue reading…

Share
 

VOIP HOME LAB – Part 1.10 Connecting Headquarters and Branch via SIP trunk

The tutorial discuss configuration steps that are needed to connect Headquarters and Branch office using SIP trunk. It is only showing configuration required to be done on Cisco Unified Communications Manager (CUCM) that is located in the Branch office. The configuration of CUCM located in Headquarters will be not explained here as it is almost […]
Continue reading…

Share
 

VOIP HOME LAB - Part 1.9 Cisco 2621XM and Belkin N+ Router Configuration

This is another tutorial from the series of VOIP tutorials that describe building VOIP home lab based on Cisco Unified Communications Manager. A network topology is here. So far we have finished configuration all of network devices, servers, Cisco IP phones and end-stations located in the Branch office LAN network. As a result, we can […]
Continue reading…

Share
 

VOIP HOME LAB - Part 1.8 Cisco Unified Communications Manager 8.5.1 Configuration

In a previous tutorial we completed Cisco Unified Communications Manager 8.5.1 installation. In this tutorial we are going to continue with CUCM configuration to support Cisco phones according to our network topology. At the end on the tutorial we should be able to place phone call between Cisco IP phone 7961 connected to Cisco Catalyst 3550 […]
Continue reading…

Share
 

VOIP HOME LAB - Part 1.7 Cisco Unified Communications Manager 8.5.1 Installation

This is another tutorial from the series of articles that describe building VOIP lab at home. So far we have built network infrastructure and installed end-user virtual machines. This tutorial discusses installation of Cisco Unified Communication Manager 8.5.1 on VMware virtual machine. It also offers a solution to problems that you may face during and after […]
Continue reading…

Share
 

VOIP HOME LAB - Part 1.1-3 VMware Workstation on Debian Linux, Windows 7 on VMware Workstation and CIPC Installation

You are reading the second from the series step-by-step tutorials that can guide you to build a network infrastructure for your home voice lab. The tutorial explains how to install VMware Workstation 10 on Debian Linux and installation Windows 7 on a VMware virtual machine. Afterwards Cisco IP Communicator – CIPC will be installed on Windows. Note: […]
Continue reading…

Share
 

VOIP HOME LAB - Part 1 Building Network Infrastructure

In the tutorial we are going to setup network infrastructure for a voice lab based on Cisco Unified Communication Manager – CUCM. First we install VMware Workstation 10 on Debian Linux. Afterwards Windows 7 is going to be installed on VMware virtual machine. Once Windows installation is finished a Cisco IP software phone 7960 – Cisco IP […]
Continue reading…

Share
 

How to make Cisco Unified Communication Manager bootable ISO from non-bootable image on Linux

Here are the exact steps that help you to make bootable CUCM ISO image from non-bootable ISO image on Linux. If you want to do the same on Windows I strongly recommend to read this tutorial. I could not write my tutorial without reading it first. Introduction Typically, non-bootable CUCM images are those available for […]
Continue reading…

Share